In this video I show how to design the swallow tail and the beak nose of the Simili Twin Fish with the new Free 3D layers added since version 9.1.2.0.
You can download the Simili Twin Free in the Shape3d Warehouse:
https://www.shape3d.com/Warehouse/Board.aspx?Board=9307
In this short video we open an IGES containing NURBS surfaces with Shape3d, and we correct the distortions we get.
Note that you need a Design Pro license or a Scan Import license to open an IGES file into Shape3d.
And only some simple IGES files can be imported into Shape3d!
In this video I show you how to design a twin fish from scratch using ghost images. The result can be downloaded in the Warehouse at https://www.shape3d.com/Warehouse/Board.aspx?Board=8581
Note that a Design Pro license is needed to design the beak nose, the swallow tail and the channels here.
In this short video I show you how to add channels to a surfboard using 3D layers in Shape3d X.
Note that you need a Design Pro license to use 3D layers in Shape3d:
https://www.shape3d.com/Products/DesignPro.aspx
In this video I show how to scan some boards with the Peel 3d scanner (https://peel-3d.com/) and how to import the scan into Shape3d to recreate a finished shape.
These scans are the first I've done after Peel 3d lent me the scanner, so I did a few mistakes and they are not perfectly clean. But it worked and the result in Shape3d is very good, and that's what's importatnt!
Note that you'll need the Import option of Shape3d to do it:
https://www.shape3d.com/Products/ImportOption.aspx
In this video I show how to scan a board with the Peel 3d scanner (https://peel-3d.com/) and how to import the scan into Shape3d to recreate a finished shape.
Note that you'll need the Import option of Shape3d to do it:
https://www.shape3d.com/Products/ImportOption.aspx
This short video shows how to design an asymmetrical tail in Shape3d X. you'll also see how to design a fin, or a foil wing!
This video shows how to remove the sandwich thickness using 3D Layers on the deck and the bottom of a board in Shape3d X.
This video shows two ways of correcting a brd file that has been imported into Shape3d with problems on the slices.
This video shows how to design wings with Shape3d X in several ways.
This video shows how to design a Beak Nose (or bevel nose) with Shape3d X in 2 different ways.
This video shows how to add fin and leash plugs to a surfboard in Shape3d, and how to position them correctly. We will also see how to transfer them to another board.
Copy a board from measurements in Shape3d X
Designing a Swallow tail using 3D layers in Shape3d X
Adding Plugs and Logos so that it looks real in the 3D view of in Shape3d X
Adding 3D layers in Shape3d to design channels or a recessed deck
Modifying the Concave without changing the rail, using the Multi curves Edition in Shape3d
Copy a board from an image in Shape3d, and add boxes and logos in the 3D view.
Using Multi curves Edition in Shape3d X instead of the V8 Design Modes
In this video I show the extended possibilities offered by the new Free 3D layers added in the update 9.1.2.0 of Shape3d X.
You can download some examples of files using Free 3D layers in the Warehouse at https://www.shape3d.com/Warehouse/Default.aspx?Account=7129
Presentation of the update 9.1.1.8 of Shape3d X
Presentation of the update 9.1.1.6 of Shape3d X
Presentation of the update 9.1.1.4 of Shape3d X
Presentation of the update 9.1.1.2 of Shape3d X